Polyester-TGIC Free (PR Series) Or Polyester-TGIC (PT Series)
The above is a thermosetting powder coating based on saturated polyester resins that is cured with a TGIC-free cross linker specially selected for exterior use. Its special characteristic with enhanced charging properties and no hazard labelling required projected the product as a non-toxic environmental friendly protective coating. Its good flow out and good atmospheric ageing resistance further enhanced itself as a highly decorative and durable for outdoor environment.
Polyester-TGIC Free (PR Series) Or Polyester-TGIC (PT Series)
The above is a thermosetting powder coating based on saturated polyester resins that is cured with a TGIC-free cross linker specially selected for exterior use. Its special characteristic with enhanced charging properties and no hazard labelling required projected the product as a non-toxic environmental friendly protective coating. Its good flow out and good atmospheric ageing resistance further enhanced itself as a highly decorative and durable for outdoor environment.
PRETREATMENT
To maximize film properties like adhesion, corrosion resistance and impact resistance, the substrates must be properly cleaned and surface conversion.
SPRAY EQUIPMENT
Papillon’s TGIC-free Polyester powders can be formulated for use with corona and tribo charge spray equipment.
FILM THICKNESS & STOVING SCHEDULE
Film thickness : 60-80 micron
Stoving Schedule : 180°C metal temperature for 10 minutes
200°C metal temperature for 10 minutes (fast cure version)
All the information given in this data sheet is the result of our research work and experience. It is given in good faith and with every belief in its accuracy but cannot be considered as a formal warranty. This technical data is subject to change without notice.
